
12. Port Management - non-iMAP Devices GenBand Reports
425
AlliedView NMS Administration Guide
FIGURE 12-5 GenBand CPE Report
This table provides the values for the GenBand connection to the CPE and includes:
• CPE Name - When provisioned by the NMS, includes the IP address of the associated iMAP and port.
• Domain - This is explained in section 7, and must be provisioned for voice service to work. If the value is only an IP
address, the value has been manually configured.
• IP Addr. - This is the voice IP address of the iMG
• Admin - This controls whether the CPE can be brought into service.
• Oper. - The actual state of the CPE. It can be Enabled only if the Oper. State is Unlock
• Version - The mgcp protocol version
• NTE - Whether the GenBand uses inband (lcs) or out-of-band (ncs) control of mgcp. This is usually lcs.
• Ping results - This is the result of selecting the Start Ping Test on a row
12.2.2 Line Reports
This table is accessed by right clicking on the GenBand icon and choosing Display Line Report. This brings up the following
figure.
This table provides information down to the individual connection and also has a ping feature. Refer to the following figure.
Comentários a estes Manuais