Allied Telesis AT-iMG606BD Especificações descarregar pdf (Página 794)

100

101

14. Provisioning the iMG/RG iMG/RG Installation Procedures

785

AlliedView NMS Administration Guide

• Have an iMG/RG General Profile with a name such as “DVLK-AI01-Vacant” and include scoping so that when it is used

only iMAPs from AI01 are accessible. Refer to Figure 14-133, Figure 14-134, and Figure 14-135.

Note: For Open Access, the Profile Name could be “DVLK-Vacant” since the Access Island number is not used as part of Scoping.

• Have a port profile available that reflects the type of port and the capabilities desired, such as “DVLK-AI01-100Mbps”.

Note: In this profile, the VLAN Configuration is not included.

• Have a customer ID ready that reflects administrative naming conventions for this type of provisioning. An appropriate

ID would be the residence address.

14.9.2.3 Pre-provision the Customer

Using the sample names listed above, the following steps are performed:

1. Bring up the Provision New Triple Play Customer Form using one of these methods:

• From the main AlliedView NMS menu, select Tools -> Customer Management -> Add New Triple Play Customer.

• For an iMAP icon, select Provision -> Port Management. From the Port Management Form select the port for the work

order, which will have no Customer ID, and click Provision New Customer/Port. (An already provisioned port should

always have a Customer ID.)

• From the port table in Network Inventory, right-click the port from the work order and select Provision New

Customer/Port.

2. In the Provision New Triple Play Customer Form, enter a Customer ID, in this example the residence address.

3. Click on Add Customer Info to add the additional text.

4. Select the iMG/RG General Profile, in this case “DVLK-AI01-Vacant”. Because of scoping, only those devices from Access

Island 1 are available.

5. Enter a port Profile. Only those port profiles relevant for the type of port selected are available.

6. Review the filled out form, as shown in Figure 14-136.

1 2 ... 789 790 791 792 793 794 795 796 797 798 799 ... 994 995

Comentários a estes Manuais

Sem comentários

Allied Telesis AT-iMG606BD Especificações Página 794

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores Allied Telesis AT-iMG606BD