Allied Telesis AT-iMG606BD Especificações Página 867

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 995
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 866
14. Provisioning the iMG/RG iMG/RG Diagnostics
858
AlliedView NMS Administration Guide
FIGURE 14-211 Warning when Diagnosing VOIP Lines
6. Click Yes to run the test. The results of the test are displayed in the Test Results fields in the table and the last diagnostic
results are displayed in the Diagnostic Details panels.
14.13.2 iMG LAN Diagnostics
MOD iMGs and the iMG726-BD-ON running software release 3.7.4 or higher support LAN diagnostics. With the NMS, you
can diagnose CPE LAN ports. This diagnosis will detect faults in the subscriber's private network cables. The GUI allows you
to select any or all CPE switch ports, diagnose them, and see the results.
The LAN Diagnostics Panel is added to the Triple-Play Service Management form for the iMG. The LAN Diagnostics belongs
to the iMG/RG Diagnostics sub-tab, but it is only displayed if the iMG/RG is an iMG726-BD-ON, iMG6x6MOD or
iMG7x6MOD CPE. Refer to the following figure.
FIGURE 14-212 LAN Diagnostics Tab for iMG726-BD-ON and MOD-type iMG
Initially the table displays each LAN port on the iMG and its current status.
Not all modules include a Glan interface; if the Glan interface is not present, the Glan row will be omitted from the table.
The current status consists of ID, Speed, Status (enabled/disabled), and Connected (true/false). These are polled from the
device and updated approximately every 30 seconds while the tab is displayed.
With each port is a “Test” button and a “Test Result” field. The Test buttons can be checked or unchecked to select
individual ports for diagnosis. The “All” button is a shortcut to conveniently check or uncheck all interfaces.
Vista de página 866
1 2 ... 862 863 864 865 866 867 868 869 870 871 872 ... 994 995

Comentários a estes Manuais

Sem comentários