Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 179)

100

101

AT-S60 Management Software User’s Guide

Section II: Advanced Features 179

5. If the new image file differs from the existing one, the following

message is displayed:

For the local management session:

Switch is about to reboot. Do you want to proceed?

[Yes/No]

For the Telnet management session:

Remote access will be lost. Do you want to continue?

[Yes/No]

6. Type N if you do not want to activate the new image file.

The Downloads & Uploads menu is displayed, as shown in Figure

46 on page 173.

7. Type Y to activate the new image file and reset the switch.

Note

If you type Y and are using a Telnet management session for this

procedure, the Telnet session terminates. Allow at least two minutes

for the process to complete before you restart the Telnet

management session.

The switch now decompresses and initializes the software, a

process that takes less than two minutes to complete. After the

management software is initialized, you can press any key to start

a local management session, or restart the Telnet management

session to display the login prompt.

Note

Do not interrupt the decompression and initialization process. Do

not manually reboot the switch. The switch automatically reboots as

part of the initialization process.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 179

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60