Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 336)

100

101

Chapter 17: SNMPv3 Configuration

Section III: SNMPv3 Protocol 336

Modifying the Notify View Name

To modify the Notify View Name parameter in an SNMPv3 Access Table

entry, perform the following procedure.

1. Follow steps 1 through 5 in the procedure described in Creating an

SNMPv3 User Table Entry on page 305. Or, from the Main Menu type

5->1->1->8->5.

The Configure SNMPv3 Table Menu is shown in Figure 101 on

page 306.

2. From the Configure SNMPv3 Table Menu, type 4 to select Configure

SNMPv3 Access Table.

The Configure SNMPv3 Access Table is shown in Figure 106 on

page 325.

3. From the Configure SNMPv3 Access Table, type 3 to select Modify

SNMPv3 Table Entry.

The Modify SNMPv3 Table Menu is shown in Figure 107 on page

332.

4. To modify the Notify View Name parameter, type 3 to select Set Notify

View Name.

The following prompt is displayed:

Enter Group Name:

5. Enter a Group Name that was previously configured.

The following prompt is displayed:

Enter Security Model[1-v1, 2-v2c, 3-v3]:

6. Enter the Security Model configured for this Group Name. You cannot

change the value of the Security Model parameter.

Select one of the following SNMP protocols:

1-v1

Select this value to associate the Group Name with the SNMPv1

protocol.

2-v2c

Select this value to associate the Group Name with the SNMPv2c

protocol.

3-v3

Select this value to associate the Group Name with the SNMPv3

protocol.

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 336

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60