Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 675)

AT-S60 Management Software User’s Guide

Section VI: Web Browser Management 675

The STP Settings Page is shown in Figure 232.

Figure 232 STP Settings Page

6. Adjust the settings as desired. The parameters are described below.

Port Priority

This parameter is used as a tie breaker when two or more ports are

determined to have equal costs to the root bridge. The default

value for priority is 128. The range is 0-15, with 0 having the

highest priority.

The spanning tree algorithm uses the cost parameter to decide

which port provides the lowest-cost path to the root bridge for a

particular LAN. Enter a value from 0 to 200,000,00. The default

❑ 0 for Auto-detect

❑ 4 for a 1 Gigabit port

❑ 10 for a 10 Mbps port

❑ 100 for a 100 Mbps port

7. After you have configured the parameters, click Apply.

8. To save your changes, return to the General Tab and click Save

Changes. The changes you made are saved on the switch.

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 675