Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 480)

100

101

Chapter 22: Web Server

Section V: Security Features 480

5. Type 1 to select Status to enable or disable the web server. To

configure the web server, you need to first disable it.

Toggle between the following values:

Enabled - enables the web server. This is the default setting.

Disabled - disables the web server.

6. Type 2 to select Mode to determine the mode of the web server.

The following prompt appears:

Enter Web Server Mode (1 - HTTP, 2 - HTTPS):

[1 to 2] ->

Choose from the following selections:

1 - HTTP to select the HTTP mode for the web server. This is the

default value.

2 - HTTPS to select the HTTPS secure mode web server. By

selecting this value, you are enabling the SSL protocol on the web

server.

Note

The SSL Key ID field only appears when you configure the Mode field

as HTTPS.

The following prompt appears:

Enter Port Number [1 to 65531]-> 443

7. Enter a port number.

The default HTTPS web server port number is 443.

The following prompt appears:

Enter SSL Key ID ->

8. Enter an SSL Key ID.

Enter a Key Pair ID that you configured in the Configuring Keys for

Encryption on page 491.

9. Type 1 to select Status to enable the web server

Select Enabled to enable the web server.

10. After making changes, type R to until you return to the Main Menu.

Then type S to select Save Configuration Changes.

1 2 ... 475 476 477 478 479 480 481 482 483 484 485 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 480

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60