Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 388)

100

101

Chapter 17: SNMPv3 Configuration

Section III: SNMPv3 Protocol 388

7. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

Modifying the Security Name

To modify the Security Name parameter in an SNMPv3 Community Table

entry, perform the following procedure:

1. Follow steps 1 through 5 in the procedure described in Creating an

SNMPv3 User Table Entry on page 305. Or, from the Main Menu type

5->1->1->8->5.

The Configure SNMPv3 Table Menu is displayed as shown in

Figure 101 on page 306.

2. From the Configure SNMPv3 Table Menu, type 9 to select Configure

SNMPv3 Community Table.

The Configure SNMPv3 Community Table Menu is shown in

Figure 116 on page 383.

3. From the Configure SNMPv3 Community Table, type 3 to select

Modify SNMPv3 Table Entry.

The Modify SNMPv3 Community Table Menu is shown in Figure

117 on page 387.

4. To change the Security Name, type 2 to select Set Security Name.

The following prompt is displayed:

Enter Community Index:

5. Enter the Community Index of the Security Name you want to

change.

The following prompt is displayed:

Enter Security Name:

6. Enter the new Security Name.

Enter a value of up to 32-alphanumeric characters.

7. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

Modifying the Transport Tag

To modify the Transport Tag parameter in an SNMPv3 Community Table

entry, perform the following procedure:

1. Follow steps 1 through 5 in the procedure described in Creating an

SNMPv3 User Table Entry on page 305. Or, from the Main Menu type

5->1->1->8->5.

1 2 ... 383 384 385 386 387 388 389 390 391 392 393 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 388

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60