Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 315)

100

101

AT-S60 Management Software User’s Guide

Section III: SNMPv3 Protocol 315

Configuring the SNMPv3 View Table

This section contains a description of the SNMPv3 View Table and how

to create, delete, and modify table entries. Creating this table, allows you

to specify a view using the following parameters:

❑ Subtree OID

❑ Subtree Mask

❑ MIB OID Table View

To configure the SNMPv3 View Table, you need to be very familiar with

the MIB tree. You can be very specific about the view a user can or

cannot access—down to a column or row of the tree. AT-S60 supports

the Internet subtree of the MIB tree. See RFC 2575 for detailed

information about defining a view.

There are three functions you can perform with the SNMPv3 User Table.

❑ Creating an SNMPv3 View Table Entry on page 315

❑ Deleting an SNMPv3 View Table Entry on page 318

❑ Modifying an SNMPv3 View Table Entry on page 319

Creating an

SNMPv3 View

Table Entry

To create an entry in the SNMPv3 View Table, perform the following

procedure.

1. Follow steps 1 through 5 in the procedure described in Creating an

SNMPv3 User Table Entry on page 305. Or, from the Main Menu type

5->1->1->8->5.

The Configure SNMPv3 Table Menu is displayed.

2. From the Configure SNMPv3 Table Menu, type 3 to select Configure

SNMPv3 View Table.

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 315

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60