Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 595)

100

101

AT-S60 Management Software User’s Guide

Section VI: Web Browser Management 595

Configuring SNMPv1 and SNMPv2c Protocols

This section provides instructions on how to create SNMPv1 and

SNMPv2c communities that have access to the switch. In addition, a

procedure that permits you to modify current SNMPv1 and SNMPv2c

community parameters is provided as well as a procedure to delete

SNMPv1 and SNMPv2c community access.

See the following procedures:

❑ Creating an SNMPv1 and SNMPv2c Community on page 595

❑ Modifying an SNMPv1 and SNMPv2c Community on page 599

❑ Deleting an SNMPv1 and SNMPv2c Community on page 601

❑ Displaying the SNMPv1 and SNMPv2c Communities on page 601

For reference information about SNMPv1 and SNMPv2c, see Chapter 5:

SNMPv1 and SNMPv2c Configuration on page 84.

Creating an

SNMPv1 and

SNMPv2c

Community

This procedure allows you to create up to eight SNMPv1 and SNMPv2c

communities that have access to the switch. In creating an SNMPv1 and

SNMPv2c community, you can specify up to eight IP addresses of

management stations that can access the switch. In addition, you can

specify up to eight trap receiver IP addresses of trap receivers that can

receive trap messages from the switch.

To create an SNMP community, perform the following procedure.

1. From the Home Page, select Configuration.

The Configuration System Page is displayed with the General Tab

selected by default, as shown in Figure 192 on page 584.

2. Select the SNMP Tab.

1 2 ... 590 591 592 593 594 595 596 597 598 599 600 ... 857 858

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 595

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S60