Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 571)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

Section VII: Port Security 571

SET SWITCH PORT SECURITYMODE

Syntax

set switch port=

port

[securitymode=automatic|limited|secured|locked]

[intrusionaction=discard|trap|disable]

[learn=

value

]

[participate=yes|no|on|off|true|false]

Parameters

port Specifies the port where you want to set security. You

can specify more than one port at a time.You can

specify the ports individually (for example, 5,7,22), as

a range (for example, 18-23), or both (for example,

1,5,14-22).

securitymode Specifies the port’s security mode. Options are:

automatic Disables security on the port. This is the

default setting.

limited Sets the port to the Limited security

mode. The port learns a limited number

of dynamic MAC addresses, set with the

LEARN parameter.

secured Sets the port to the Secured security

mode. The port accepts frames based

only on static MAC addresses. You must

enter the static MAC addresses of the

nodes with frames the port is to accept

after you have activated this security

mode on a port. To add static MAC

addresses, use the command “ADD

SWITCH FDB|FILTER” on page 156.

locked Sets the switch to the Locked security

mode. The port stops learning new

dynamic MAC addresses. The port

forwards frames based on static MAC

addresses and on those dynamic

addresses it has already learned.

Note

The online help for this command includes a “pacontrol” option for

this parameter. The option is nonfunctional.

1 2 ... 566 567 568 569 570 571 572 573 574 575 576 ... 679 680

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 571

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63