Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 574)

100

101

Chapter 33: MAC Address-based Port Security Commands

574 Section VII: Port Security

SHOW SWITCH PORT INTRUSION

Syntax

show switch port=

port

intrusion

Parameter

port Specifies the port where you want to view the number

of intrusions that have occurred. You can specify

more than one port at a time.

Description

This command displays the number of times a port has detected an

intrusion violation. An intrusion violation varies depending on the security

mode:

 Limited Security Level - An intrusion is an ingress frame with a source

MAC address not already learned by a port after the port had reached

its maximum number of dynamic MAC addresses, or that was not

assigned to the port as a static address.

 Secured Security Level - An intrusion is an ingress frame with a source

MAC address that was not entered as a static address on the port.

 Locked - An intrusion is an ingress frame with a source MAC address

that the port has not already learned or that was not assigned as a

static address.

Example

The following command displays the number of intrusion violations

detected on ports 12 and 21:

set switch port=12,21 intrusion

1 2 ... 569 570 571 572 573 574 575 576 577 578 579 ... 679 680

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 574

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63