
Chapter 29: Virtual LANs
286 Section II: Using the Web Browser Interface
Modifying a Port-Based VLAN
To modify a port-based VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
2. From the Bridge folder, select VLAN.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN page is shown in Figure 82 on page 285.
4. In the VLAN Action column, click modify
next to the VLAN that you
want to change.
The Modify Port-based VLAN Page is shown in Figure 83.
Figure 83. Modify Port-based VLAN
5. To change the VLAN ID, type a VLAN ID in the Index field.
You can choose a value between 2 and 4,000.
6. To change the name of the VLAN, type in a name in the VLAN Name
field.
7. To assign ports to the VLAN, click on the port numbers labeled either
Static Tagged or Static Untagged. Then click Apply.
Comentários a estes Manuais