Allied-telesis AT-S99 Manual do Utilizador descarregar pdf (Página 110)

Chapter 4: Configuring the AT-CV5M02 Management Card

110

5. To save your changes in the master configuration file, go to the Main

Menu and select Configuration to display the Configuration menu and

select Save System and All Line Card Configurations.

Web Browser To configure the 10/100Base-TX port on the management card from the

web browser windows:

1. Select Module Status and Configuration from the menu bar.

2. In the Chassis View, click the 10/100Base-TX port on the

management card. Alternatively, select the Menu View tab and click

the name of the management card. The Port A tab for the

management card is shown in Figure 37.

Figure 37. Port A Tab for the Management Card

Auto negotiate

Manual negotiate

Full

Half

Hundred Base <100Base-TX>

Ten Base <10Base-T>

(Continued)

When configuring a port, observe the following

guidelines:

 If the network device connected to a line card port

does not use Auto-Negotiation and has a fixed

duplex mode of full duplex, disable Auto-Negotiation

on the port and set the speed and duplex mode

manually to avoid a duplex mode mismatch.

Table 11. Port Configuration Menu for the 10/100Base-TX Port on the Management Cards

Setting Description

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 319 320

Sem comentários

Allied-telesis AT-S99 Manual do Utilizador Página 110