Allied-telesis AT-S99 Manual do Utilizador Página 234
- Página / 320
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter 9: Configuring AT-CM Line Cards for Dying Gasp
234
19. If the Mode parameter is set to Passive. highlight Mode and press
Return to toggle the parameter to Active.
Note
The Admin State and the Mode parameters are the only OAM
variables you have to configure for the dying gasp feature. For
information on the other parameters in this window, refer to
“Configuring an OAM Client” on page 204.
20. Return to the Main Menu.
21. Select Configuration.
22. Select Save System and All Line Card Configurations.
23. Return to the Main Menu.
This completes the procedure for configuring the AT-CM Media Converter
Line Card for the dying gasp feature. Repeat this procedure on all of the
line cards that will send or receive the signal in the AT-CV1203 and
AT-CV5000 Chassis. Afterwards, for those line cards intended for the
AT-CV1203 Chassis, install the line cards in the units and deploy the units
at the remote sites.
- User’s Guide 1
- Contents 3
- Contacting Allied Telesis 17
- Management 18
- Software Updates 18
- AT-CV5M02 Management Card 19
- The Converteon Product Line 20
- AT-S99 Management Software 22
- Console Port 22
- 10/100Base-TX Port 22
- IP Address Configuration 23
- Event Log 23
- Activity Monitor 23
- Syslog Client 23
- Network Time Protocol Client 24
- Manager and Operator Accounts 24
- Management Access 25
- Redundant Management Cards 26
- Access to Your Network 28
- Configuration Files 29
- Restoring 30
- Configurations to 30
- AT-CM Line 30
- Cards and 31
- Remote Peer 31
- Redundant 32
- Converteon Chassis 34
- Line Cards 35
- 2. Four T1/E1 ports 38
- Link Test 40
- MissingLink 40
- Smart MissingLink 40
- Operating Modes 42
- MissingLink 43
- OAM-based Features 46
- Local line cards in the 49
- Remote line cards 49
- OAM Loopback 51
- OAM Variable 55
- Requests 55
- OAM Client 56
- Starting a Management Session 57
- AT-CV501 58
- > Enable this port 60
- Disable this port 60
- System name: -> 60
- Figure 12. Chassis View 63
- Switch Over Management Cards 67
- Changing the 69
- Manager and 69
- Passwords 69
- Setting the Date 71
- Naming the 72
- Saving Your 72
- Configuring the AT-CV5M02 79
- Management Card 79
- Assigning a Name 85
- Resetting the Management Card 96
- Viewing the Event Log 98
- Viewing the Activity Monitor 104
- Configuring the Syslog Client 105
- Converteon 115
- Terminal Configuration Menu 119
- Data Rate (baud rate) 119
- Pinging Network Devices 125
- Converter Line Cards 127
- Module 4 - Port A 140
- Port Configurations 140
- OAM Configurations 140
- Port Management Menu 140
- Setting the Operating Mode 145
- Max Frame Size Config Menu 150
- Module 14 150
- Max Frame Size: 1632 150
- Setting the Auto-copy Feature 151
- Displaying Port Statistics 160
- Remote Peer Management 173
- Naming a Remote 179
- Line Card 179
- Displaying the 184
- Configuration 184
- Configuring 184
- Remote Ports 184
- Saving the 186
- Parameter 186
- Settings 186
- Chapter 7 191
- AT-CV5000 193
- TDM Management Menu 194
- Module 15, Port C 194
- TDM Port Configurations 194
- UART Configurations 194
- UART Configuration Menu 195
- > UART Local Console Mode 195
- UART Back Plane Mode 195
- Configuring the Operations 203
- Configuring an OAM Client 204
- OAM port is disconnected 210
- OAM is not in active mode 210
- Displaying OAM Statistics 223
- Dying Gasp 229
- Testing the Feature 235
- Configuring SNMPv3 237
- SNMPv3 Overview 238
- SNMPv3 Storage 241
- SNMPv3 Message 241
- Notification 241
- SNMPV3 Auth Table 242
- SNMPv3 User Table 242
- SNMPv3 View Table 242
- SNMPv3 Access Table 242
- SNMPv3 Group Table 245
- SNMPv3 Notify Table 245
- SNMPv3 Target Address Table 245
- Configuring SNMPv3 Entities 247
- Chapter 11 271
- Overview 272
- Configuring the TFTP Client 273
- TFTP Server IP Address-> _ 284
- Software Programs 287
- SNMPv3 Configuration Examples 291
- Configure SNMPv3 Access Table 292
- Configure SNMPv3 Group Table 292
- Operator 293
- Worksheet 294
- Numerics 317
Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S99
Hardware de computador Allied-telesis AlliedView-EMS 3.11 MIB COMPILER Manual do Utilizador
(13 páginas)
(13 páginas)
Hardware de computador Allied-telesis AlliedView-EMS 3.11 INSTALLATION Manual do Utilizador
(29 páginas)
(29 páginas)
Hardware de computador Allied-telesis AlliedView-EMS 3.11 VLAN MANAGER Manual do Utilizador
(72 páginas)
(72 páginas)
Hardware de computador Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual do Utilizador
(130 páginas)
(130 páginas)
Hardware de computador Allied-telesis AlliedView-EMS 3.11 QoS MANAGER Manual do Utilizador
(146 páginas)
(146 páginas)
Hardware de computador Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual do Utilizador
(402 páginas)
(402 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.067 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais