Allied-telesis AT-S99 Manual do Utilizador descarregar pdf (Página 115)

AT-S73 and AT-S99 Management Software User’s Guide

115

Configuring the Temperature Threshold

The management card has a temperature threshold parameter to alert you

in the event the temperature of the wiring closet exceeds operating norms.

If the threshold is exceeded, the management card enters an event in the

event log and sends an SNMP trap. The temperature is measured on the

power supply near the cooling vents of the chassis and tends to reflect the

ambient air temperature.

Menus To set the temperature threshold from the menus:

1. From the Main Menu, select Configuration to display the

Configuration Menu shown in Figure 20 on page 80.

2. From the Configuration Menu, select System Configuration to display

the menu in Figure 21 on page 80.

3. Select Temperature Threshold Configuration to display the

Temperature Threshold Configuration Menu in Figure 39. The

temperature threshold is given in Celsius (° C).

Figure 39. Temperature Threshold Configuration Menu

4. Select Maximum Temperature Threshold and enter a new value.

The range is 0 to 75° C. The default is 60° C.

5. To save your changes in the master configuration file, return to the

Configuration menu and select Save System and All Line Card

Configurations.

Web Browser To set the temperature threshold from the web browser windows:

1. Select Configuration from the menu bar.

2. If the System tab is not selected, select it. The System tab is shown in

Figure 23 on page 83.

3. Click Edit in the Temperature Threshold section.

Temperature Threshold Configuration Menu

Converteon

Maximum Temperature Threshold: 60

Return to System Configuration Menu ...

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 319 320

Sem comentários

Allied-telesis AT-S99 Manual do Utilizador Página 115