Allied-telesis AT-S99 Manual do Utilizador descarregar pdf (Página 149)

AT-S73 and AT-S99 Management Software User’s Guide

149

Assigning Names to AT-CM Line Cards

Menus To assign names to the AT-CM Line Cards from the menus:

1. From the Main Menu, select Module Status and Configuration to

display the Module Status and Configuration menu shown in Figure 48

on page 128.

2. From the Module Status and Configuration menu, select the line card

you want to name. You can configure only one line card at a time. The

Module Configuration Menu in Figure 53 on page 139 is displayed.

3. From the Module Configuration Menu, select Module Name and enter

the new name for the card. The name can be up to eight alphanumeric

characters. Spaces and special characters are not allowed.

4. To save your changes in the master configuration file, select Line

Card Configuration and Save Line Card Configuration. Or, return to

the Main Menu and select Configuration and Save System and All

Line Card Configurations.

Web Browser To assign names to the AT-CM Line Cards from the web browser

windows:

1. Select Module Status & Configuration from the menu bar.

2. In the Chassis View, click a port on the line card you want to assign a

name. Alternatively, select the Menu View tab and click the name of

the line card. You can configure only one line card at a time.

3. Click the Setting tab, shown in Figure 58.

4. Click Edit in the Module Name section of the window.

5. In the Module Name pop-up window, enter the new name for the card.

The name can be up to eight alphanumeric characters. Spaces and

special characters are not allowed.

6. Click Update.

7. To save your changes in the master configuration file, select

Configuration from the menu bar. From the Configuration window,

click the Files tab, Save System Configuration and All Cards

Configurations, and Apply.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 319 320

Sem comentários

Allied-telesis AT-S99 Manual do Utilizador Página 149