Allied-telesis AT-S95 CLI Manual do Utilizador descarregar pdf (Página 139)

IP Addressing Commands

Page 127

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example defines default domain name www.website.com.

ip name-server

The ip name-server Global Configuration mode command defines the available name servers. Use the no form

of this command to remove a name server.

Syntax

ip name-server server-address [server-address2 … server-address8]

no ip name-server [server-address1 … server-address8]

Parameters

•

server-address — Specifies IP addresses of the name server.

Default Configuration

No name server addresses are specified.

Command Mode

Global Configuration mode

User Guidelines

The preference of the servers is determined by the order in which they were entered.

Up to 8 servers can be defined using one command or using multiple commands.

To define a radius server on the out-of-band port, use the out-of-band IP address format: oob/ip-address.

Example

The following example sets the available name server.

ip host

The ip host Global Configuration mode command defines static host name-to-address mapping in the host cache.

Use the no form of this command to remove the name-to-address mapping.

Console(config)#

ip domain-name

www.website.com

Console(config)#

ip name-server

176.16.1.18

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 347 348

Sem comentários

Allied-telesis AT-S95 CLI Manual do Utilizador Página 139