Allied-telesis AT-S95 CLI Manual do Utilizador descarregar pdf (Página 332)

Page 320

Not approved by Document Control. For review only.

Allied Telesis

Command Line Interface User’s Guide

User Guidelines

The actual timeout can be determined by comparing the dot1x timeout server-timeout value and the result of

multiplying the radius-server retransmit value with the radius-server timeout value and selecting the lower of

the two values.

Example

The following example sets the time for the retransmission of packets to the authentication server to 3600

seconds.

show dot1x

The show dot1x Privileged EXEC mode command displays the 802.1X status of the device or specified interface.

Syntax

show dot1x [ethernet interface]

Parameters

•

interface — Valid Ethernet port. (Full syntax: unit/port)

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the status of 802.1X-enabled Ethernet ports.

Console(config-if)#

dot1x timeout server-timeout

3600

Console#

show dot1x

802.1x is disabled

Port Admin Mode Oper Mode Reauth

Control

Reauth

Period

Username

---- ---------- --------- ------- ------ --------

1/g1 Auto Authorized Enabled 3600 Bob

1/g2 Auto Authorized Enabled 3600 John

1/g3 Auto Authorized Enabled 3600 Clark

1/g4 Auto Authorized Enabled 3600 Bill

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 347 348

Sem comentários

Allied-telesis AT-S95 CLI Manual do Utilizador Página 332