Allied-telesis AT-S95 CLI Manual do Utilizador descarregar pdf (Página 178)

Page 166

Not approved by Document Control. For review only.

Allied Telesis

Command Line Interface User’s Guide

Default Configuration

1000 Kbits/Sec

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The command can be enabled on a specific port only if port storm-control Broadcast enable interface

configuration command is not enabled on that port.

Example

The following example limits the rate of the incoming traffic to 62.

traffic-shape

The traffic-shape Interface Configuration mode command sets a shaper on an egress interface. Use the no form

of this command to disable the shaper.

Syntax

traffic-shape committed-rate [committed-burst]

no traffic-shape

Parameters

•

committed-rate — The average traffic rate (CIR) in bits per second (bps). (Range: 64-10000000.)

• committed-burst — The excess burst size (CBS) in bytes. (Range: 4096-16769020.)

Default Configuration

No shape is defined.

Command Mode

Interface Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a shaper on port g1.

show qos interface

The show qos interface User EXEC mode command displays interface QoS information.

Console(config-if)#

rate-limit

Console(config-if)#

traffic-shape

50000

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 347 348

Sem comentários

Allied-telesis AT-S95 CLI Manual do Utilizador Página 178