Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 115)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

115

no, off, false, disabled The port discards all

unknown unicast frames.

These options are

equivalent.

holbplimit Specifies the threshold at which the switch signals a

head of line blocking event on a port. The threshold

is specified in cells. A cell is 64 bytes. The range is 1 to

61,440 cells; the default is 7,168.

softreset Resets the port. This parameter does not change any

of a port’s operating parameters.

priority Specifies the port’s priority level. All ingress

untagged packets will be stored in the egress queue

on the egress port that corresponds to the priority

level specified with this parameter. If you include the

OVERRIDEPRIORITY parameter, this will also apply to

all ingress tagged packets. The range is 0 to 7; 0 is

the lowest priority, and 7 is the highest. The default

is 0.

overridepriority Determines if a port should ignore the priority level

in tagged packets and store the packets in the

egress port’s priority queue that corresponds to the

priority level set with the PRIORITY parameter. The

options are:

yes, on, true Overrides the priority level in

tagged packets. The options are

equivalent.

no, off, false Does not override the priority in

tagged packets. The options are

equivalent.

Description

This command sets a port’s operating parameters. You can set more

than one parameter at a time. For an explanation of the port parameters,

refer to Chapter 6, “Port Parameters” in the AT-S63 Management Software

Menus Interface User’s Guide.

Examples

The following command disables ports 1 to 6:

set switch port=1-6 status=disabled

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 115

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63