Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 80)

100

101

Chapter 4: SNMPv2 and SNMPv2c Commands

SET SNMP COMMUNITY

Syntax

set snmp community="

community

[access=read|write]

[open=yes|no]

Parameters

community Specifies the SNMP community string whose access

level or access status is to be changed. This

community string must already exist on the switch.

This parameter is case sensitive. The name must be

enclosed in double quotes if it contains a space or

other special character such as an exclamation point.

Otherwise, the quotes are optional.

access Specifies the new access level. Options are “read” for

read only access and “write” for both read and write

access. If no access level is specified, the default is

“read.”

open Specifies the open or closed access status of the

community string. The options are:

yes The community string is open, meaning that

any management station can use the string to

access the switch.

no The community string is closed, meaning that

only those management stations whose IP

addresses are assigned to the string can use it

to access the switch. To add IP addresses of

management stations to a community string,

refer to “ADD SNMP COMMUNITY” on page 66.

The default setting for a community string is

closed.

Description

This command changes the access level and access status of an existing

SNMP community string.

Examples

The following command changes the access status for the SNMP

community string “sw44” to closed:

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 80

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63