Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 55)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

SET SYSTEM

Syntax

set system [name="

name

"] [contact="

contact

[location="

location

Parameters

name Specifies the name of the switch. The name can be from 1 to

39 alphanumeric characters in length and must be enclosed

in double quotes (“ “). Spaces are allowed.

contact Specifies the name of the network administrator

responsible for managing the switch. The contact can be

from 1 to 39 alphanumeric characters in length and must be

enclosed in double quotes. Spaces are allowed.

location Specifies the location of the switch. The location can be

from 1 to 39 alphanumeric characters in length and must be

enclosed in double quotes. Spaces are allowed.

Description

This command sets a switch’s name, the name of the network

administrator responsible for managing the unit, and the location of the

unit.

If a parameter already has a value, the new value replaces the existing

value. To view the current values for these parameters, refer to “SHOW

SYSTEM” on page 63. To delete a value without assigning a new value,

refer to “RESET SYSTEM” on page 44.

Note

If you define the system name before you set up a system prompt,

the switch uses the first 16 characters of the system name as the

prompt. See “SET PROMPT” on page 30.

Examples

The following command sets a switch’s information:

set system name="Sales" contact="Jane Smith" location="Bldg

3, rm 212"

The following command sets just the system’s name:

set system name="PR Office"

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63