Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 187)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

187

numbermulticastgroups Specifies the maximum number of

multicast addresses the switch learns. This

parameter is useful with networks that

contain a large number of multicast

groups. You can use the parameter to

prevent the switch’s MAC address table

from filling up with multicast addresses,

leaving no room for dynamic or static MAC

addresses. The range is 1 to 256 addresses;

the default is 64 addresses.

routerport Specifies the port(s) on the switch

connected to a multicast router. Options

are:

port Specifies the router port(s)

manually.

all Specifies all of the switch

ports.

none Sets the mode to manual

without any router ports

specified.

auto Activates auto-detect, where

the switch automatically

determines the ports with

multicast routers.

Description

This command configures the IGMP snooping parameters.

Example

The following command activates IGMP snooping, sets the IGMP

topology to Multi-Host, and sets the timeout value to 120 seconds:

set ip igmp snoopingstatus=enabled hoststatus=multihost

timeout=120

The following command changes the topology to Single-Host:

set ip igmp hoststatus=singlehost

The following command disables IGMP snooping:

set ip igmp snoopingstatus=disabled

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 187

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63