Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 233)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

233

revisionlevel Specifies the version number of an MSTP region.

The range is 0 (zero) to 255. This is an arbitrary

number that you assign to a region. The version

level must be the same on all bridges in a region.

Different regions can have the same version level

without conflict.

Description

This command configures the following MSTP parameter settings.

❑ Hello time

❑ Forwarding delay

❑ Maximum age time

❑ Maximum hop count

❑ Force version of STP or normal MSTP

❑ Configuration name

❑ Revision level

Examples

The following command disables MSTP and returns all MSTP parameter

settings to their default values:

set mstp default

The following command sets the hop count to 10, the configuration

name to Engineering Region, and the reversion level to 2:

set mstp maxhops=10 configname="Engineering Region"

revisionlevel=2

The following command uses the FORCEVERSION parameter to

configure the bridge to use the MSTP parameters but to transmit only

STP BPDU packets:

set mstp forceversion=forcestpcompatible

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 233

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63