Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 285)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

285

SET SNMPV3 NOTIFY

Syntax

set snmpv3 notify=

notify

tag=

tag

[type=trap|inform]

[storagetype=volatile|nonvolatile]

Parameters

notify Specifies the name associated with the trap

message, up to 32 alphanumeric characters.

tag Specifies the notify tag name, up to 32

alphanumeric characters.

type Specifies the message type. Options are:

trap Trap messages are sent, with no response expected

from the host.

inform Inform messages are sent, with a response expected

from the host.

storagetype Specifies the storage type of this table entry. This is

an optional parameter. The options are:

volatile Does not allow you to save the table entry to the

configuration file on the switch. This is the default.

nonvolatile Allows you to save the table entry to the

configuration file on the switch.

Description

This command modifies an SNMPv3 Notify Table entry.

Examples

The following command modifies an SNMPv3 Notify Table entry called

“systemtesttrap2.” The notify tag is “systemtesttag2” and the message

type is a trap message.

set snmpv3 notify=systemtesttrap2 tag=systemtesttag2

type=trap

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 285

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63