Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 436)

100

101

Chapter 33: 802.1x Port-based Network Access Control Commands

436

SET RADIUSACCOUNTING

Syntax

set radiusaccounting [status=enabled|disabled]

[serverport=

value

] [type=network]

[trigger=start_stop|stop_only]

[updateenable=enabled|disabled] [interval=

value

]

Parameters

status Activates and deactivates RADIUS accounting on the

switch. The options are:

enabled Activates RADIUS accounting.

disabled Deactivates the feature. This is the

default.

serverport Specifies the UDP port for RADIUS accounting. The

default is port 1813.

type Specifies the type of RADIUS accounting. The default

is Network. This value cannot be changed.

trigger Specifies the action that causes the switch to send

accounting information to the RADIUS server. The

options are:

start_stop The switch sends accounting

information whenever a client logs on or

logs off the network. This is the default.

stop_only The switch sends accounting

information only when a client logs off.

updateenable Specifies whether the switch is to send interim

accounting updates to the RADIUS server. The

default is disabled. If you enable this feature, use the

INTERVAL parameter to specify the intervals at which

the switch is to send the accounting updates.

interval Specifies the intervals at which the switch is to send

interim accounting updates to the RADIUS server.

The range is 30 to 300 seconds. The default is 60

seconds.

1 2 ... 431 432 433 434 435 436 437 438 439 440 441 ... 463 464

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 436

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63