Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 118)

100

101

Page 117

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

User Guidelines

Use the port storm-control broadcast enable Interface Configuration mode command to enable Broadcast

storm control.

The software displays the actual rate since granularity depends on the requested rate.

Example

The following example configures the maximum storm control Broadcast rate at 900 Kbits/Sec.

show ports storm-control

The show ports storm-control User/Privileged EXEC mode command displays the storm control configuration.

show ports storm-control [interface]

Parameters

•

interface — A valid Ethernet port. (Full syntax: unit/port)

Default Configuration

This command has no default configuration.

Command Modes

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the storm control configuration.

console(config)#

interface ethernet

1/e5

console(config-if)#

port storm-control broadcast rate

900

console#

show ports storm-control

Port State Rate [Kbits/Sec] Included

---- -------- ---------------- --------------------------------------

1/e1 Enabled 70 Broadcast, Multicast

2/e1 Enabled 100 Broadcast

3/e1 Disabled 100 Broadcast

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 118

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series)