Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 332)

100

101

Page 331

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Example

The following example lists open Telnet sessions.

The following table describes significant fields shown above.

show system

The show system User EXEC mode command displays system information.

Syntax

show system [unit unit]

Parameters

•

unit— Specifies the number of the unit. (Range: 1-6)

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the system information

console>

show sessions

Connection Host Address Port Byte

---------- ------------- ---------- ----- ----

1 Remote device 172.16.1.1 23 89

2 172.16.1.2 172.16.1.2 23 8

Field Description

Connection Connection number.

Host Remote host to which the device is connected through a Telnet session.

Address IP address of the remote host.

Port Telnet TCP port number

Byte Number of unread bytes for the user to see on the connection.

console#

show system

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 332

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series)