Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 391)

100

101

802.1x Commands

Page 390

Parameters

•

sec — Specify the timeout in seconds. (Range: 30 – 180)

Default Configuration

The guest VLAN is applied immediately.

Command Mode

Global Configuration mode.

User Guidelines

This command is relevant if the guest VLAN is enabled on the port. Configuring the timeout adds delay from

enabling 802.1X (or port up) to the time the switch puts the port in the guest VLAN

Example

The following example

configures the delay from enabling 802.1X (or port up) to adding the port to the guest VLAN

to 50 seconds.

dot1x radius-attributes vlan

Use The dot1x radius-attributes vlan Interface Configuration command enables user-based VLAN assignment.

Use the no form of this command to disable user-based VLAN assignment..

Syntax

dot1x radius-attributes vlan

no dot1x radius-attributes vlan

Parameters

This command has no arguments or keywords.

Default Configuration

Disabled.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

The command configurations allowed only when the port is Forced Authorized.

Radius attributes are supported only in the multiple sessions mode (multiple hosts with authentication).

When Radius attributes are enabled and the Radius Accept message does not contain as an attribute the

supplicant’s VLAN then the supplicant is rejected.

Packets to the supplicant are sent untagged.

console#

configure

console(config)#

dot1x guest-vlan timeout

1 2 ... 386 387 388 389 390 391 392 393 394 395 396 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 391

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series)