Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 351)

VLAN Commands

Page 350

Syntax

switchport general allowed vlan add vlan-list [tagged | untagged]

switchport general allowed vlan remove vlan-list

Parameters

•

add vlan-list — Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma

and no spaces. A hyphen designates a range of IDs.

• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a

comma and no spaces. A hyphen designates a range of IDs.

• tagged — Indicates that the port transmits tagged packets for the VLANs.

• untagged — Indicates that the port transmits untagged packets for the VLANs.

Default Configuration

If the port is added to a VLAN without specifying tagged or untagged, the default setting is tagged.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

This command enables changing the egress rule (e.g., from tagged to untagged) without first removing the VLAN

from the list.

Example

The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port 1/e16 .

switchport general pvid

The switchport general pvid Interface Configuration mode command configures the PVID when the interface is

in general mode. Use the no form of this command to return to the default configuration.

Syntax

switchport general pvid vlan-id

no switchport general pvid

Parameters

•

vlan-id — Specifies the PVID (Port VLAN ID).

Default Configuration

If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

console(config)# interface ethernet 1/e16

console(config-if)# switchport general allowed vlan add 2,5-6 tagged

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 401 402

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 351