Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 266)

100

101

Page 265

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Parameters

This command has no arguments or keywords.

Default Configuration

Spanning tree is enabled on all ports.

Command Modes

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example disables spanning-tree on Ethernet port 1/e5.

spanning-tree cost

The spanning-tree cost Interface Configuration mode command configures the spanning tree path cost for a

port. Use the no form of this command to return to the default configuration.

Syntax

spanning-tree cost cost

no spanning-tree cost

Parameters

•

cost — Path cost of the port (Range: 1 - 200,000,000)

Default Configuration

Default path cost is determined by port speed and path cost method (long or short) as shown below:

Command Modes

Interface Configuration (Ethernet, port-channel) mode

console(config)# interface ethernet 1/e5

console(config-if)# spanning-tree disable

Interface Long Short

Port-channel 20,000 4

Gigabit Ethernet (1000 Mbps) 20,000 4

Fast Ethernet (100 Mbps) 200,000 19

Ethernet (10 Mbps) 2,000,000 100

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 266

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series)