Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador descarregar pdf (Página 275)

100

101

Spanning-Tree Commands

Page 274

Syntax

spanning-tree mst configuration

Parameters

This command has no arguments or keywords.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

All devices in an MST region must have the same VLAN mapping, configuration revision number and name.

Example

The following example configures an MST region.

instance (mst)

The instance MST Configuration mode command maps VLANS to an MST instance.

Syntax

instance instance-id {add | remove} vlan vlan-range

Parameters

•

instance-ID—ID of the MST instance (Range: 1-7).

• vlan-range—VLANs to be added to or removed from the specified MST instance. To specify a range of

VLANs, use a hyphen. To specify a series of VLANs, use a comma. (Range: 1-4094).

Default Configuration

VLANs are mapped to the common and internal spanning tree (CIST) instance (instance 0).

Command Modes

MST Configuration mode

User Guidelines

All VLANs that are not explicitly mapped to an MST instance are mapped to the common and internal spanning

tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.

console(config)#

spanning-tree mst configuration

console(config-mst) #

instance

add vlan

10-20

console(config-mst) #

name

region1

console(config-mst) #

revision

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador Página 275

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series)